View FAR-M3DC-97M200-E100_804203.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

FUJITSU SEMICONDUCTOR DATA SHEET
DS04-21711-1E
ASSP for DTS
Piezoelectric VCO
(6 to 30 MHz)
M3 Series (E100)
s DESCRIPTION
The M3 series (E100) of VCO (Voltage Controlled Oscillator) apply to the frequency range 70-300 MHz. The M3 series uses a single lithium tantalate piezoelectric crystal (LiTaO3) that has large electromechanical coupling coefficient, and a unique SAW resonator. That provides wide bandwidths, and exceptional stability in VHF band until 300MHz.
s FEATURES
* * * * * * * Frequency range: 70 to 300MHz Wide frequency controllable range: Over than 1600 ppm (0.5 to 4.5 V) Excellent temperature stability: 200 ppm or less (-10 to 70 C) No adjustment is required due to high accuracy oscillation frequency (300 ppm or less) Highly reliable hermetically sealed package High carrier noise ratio: -90dB or less (Detuning;12.5kHz, bandwidth; 8kHz) Small type, and compatible with 8-pin DIP IC
s PACKAGE
M3 Series (E100)
s PIN ASSIGNMENT
(Bottom View)
1
4
8
5
s PIN DESCRIPTIONS
Pin No. 1 4 5 8 Symbol VIN GND Pout VCC Input (Control voltage) Ground Output Supply voltage Descriptions
2
M3 Series (E100)
s ABSOLUTE MAXIMUM RATINGS
Parameter Supply voltage Input control voltage Operating temperature Storage temperature Oscillation frequency range Symbol VCC VIN Ta Tstg Rating Min. -0.5 -0.5 -10 -40 70 Max. +7.0 +7.0 +70 +100 300 Unit V V C C MHz
WARNING: Piezoelectric devices can be permanently damaged by application of stress (voltage, current, temperature, etc.) in excess of absolute maximum ratings. Do not exceed these ratings.
s RECOMMENDED OPERATING CONDITIONS
Parameter Supply voltage Input control voltage Operating temperature Control electrode Symbol VCC VIN Ta Value Min. + 4.5 0.0 -10 Straight polarity Max. + 5.5 + 5.0 +70 Unit V V C
WARNING: The recommended operating conditions are required in order to ensure the normal operation of the piezoelectric device. All of the device's electrical characteristics are warranted when the device is operated within these ranges. Always use piezoelectric devices within their recommended operating condition ranges. Operation outside these ranges may adversely affect reliability and could result in device failure. No warranty is made with respect to uses, operating conditions, or combinations not represented on the data sheet. Users considering application outside the listed conditions are advised to contact their FUJITSU representatives beforehand.
s STANDARD FREQUENCIES
Nominal frequency 70.0 MHz 74.25 MHz 97.2 MHz 155.52 MHz Application Wireless HDTV HDTV B-ISDN Part number FAR-M3DC-70M000-E100 FAR-M3DC-74M250-E100 FAR-M3DC-97M200-E100 FAR-M3DC-155M52-E100
3
M3 Series (E100)
s ELECTRICAL CHARACTERISTICS
Parameter Supply current Deviation of oscillation frequency Oscillation frequency Symbol ICC fO fL fH Condition Without load VIN = 2.5 V VIN = 0.5 V VIN = 4.5 V Value Min. -300 +1600 -100 +2.0 -2 -200 -2 Typ. Max. +30 +300 -1600 +100 +2 +200 +2 Unit mA ppm ppm ppm ppm Nominal frequency reference VIN = 2.5 V reference VIN = 2.5 V VCC = 5 V reference VIN = 2.5 V reference Remarks
Frequency supply voltage f (VCC) VCC = 5 V 5% stability Output power Output power stability Frequency stability with temperature Output power stability with temperature POUT P f (Ta) P (Ta) VIN = 2.5 V VIN = 0.5 to 4.5 V Ta = -10 to 70 C VIN = 2.5 V Ta = -10 to 70 C VIN = 2.5 V
dBm 50 terminated dB
ppm 25 C reference dB 25 C reference
s MEASURMENT CIRCUIT
VCC ICC 8 5
Spectrum Analyzer
D.U.T.
VIN
1
4
4
M3 Series (E100)
s TYPICAL CHARACTERISTICS
Part number : FAR-M3DC-70M000-E100 1. Control Voltage vs. Oscillation Frequency Variation Oscillation frequency variation (ppm)
5000 4000 3000 2000 1000 0 -1000 -2000 -3000 -4000 -5000 0 0.5 1 1.5 2 2.5 3 3.5 4 VCC = 5.0 V
4.5
5
Control voltage (V) 2. Supply Voltage vs. Oscillation Frequency Variation Oscillation frequency variation (ppm)
500 400 300 200 100 0 -100 -200 -300 -400 -500 4.5 VIN = 2.5 V
4.75
5
5.25
5.5
Supply voltage (V) 3. Temperature Characteristics Oscillation frequency variation (ppm)
500 400 300 200 100 0 -100 -200 -300 -400 -500 -20 VCC = 5.0 V, VIN = 2.5 V
-10
0
10
20
30
40
50
60
70
Temperature ( C)
5
M3 Series (E100)
s PART NUMBER DESIGNATION
[Designation example] FAR - M3DC - (1) - E100 (2)
(1) : Frequency : This specifies the nominal frequency using six alphanumeric characters. M indicates the decimal point.
(2) : Taping
: "-R" means 100 pcs/reel
s MARKING
Logo
Frequency
F
74M250 E100
Series Name
Lot Number
No.1 pin indication
6
M3 Series (E100)
s PACKAGE DIMENSION
F
74M250 E100
13.08 Max.
0.8 0.2
4 - 0.45
7.6 0.1 3 - 1.5 1 4 13.08 Max. 7.6 0.1 8 5
6.35 0.35
4.7 0.2
Dimensions in mm.
7
M3 Series (E100)
FUJITSU MEDIA DEVICES LIMITED
For further information please contact: Japan FUJITSU MEDIA DEVICES LIMITED International Sales and Marketing Dept. Sin-Yokohama Square Bldg.,14F, Shin-Yokohama 2-3-12, Kouhoku-ku, Yokohama-shi, Kanagawa 222-0033, Japan Tel: +81-45-471-0061 Fax: +81-45-471-0076
http://www.fujitsu.co.jp/hypertext/fmd/English/index.html
All Rights Reserved. The contents of this document are subject to change without notice. Customers are advised to consult with FUJITSU sales representatives before ordering. The information and circuit diagrams in this document are presented as examples of semiconductor device applications, and are not intended to be incorporated in devices for actual use. Also, FUJITSU is unable to assume responsibility for infringement of any patent rights or other rights of third parties arising from the use of this information or circuit diagrams. The contents of this document may not be reproduced or copied without the permission of FUJITSU LIMITED. FUJITSU semiconductor devices are intended for use in standard applications (computers, office automation and other office equipments, industrial, communications, and measurement equipments, personal or household devices, etc.). CAUTION: Customers considering the use of our products in special applications where failure or abnormal operation may directly affect human lives or cause physical injury or property damage, or where extremely high levels of reliability are demanded (such as aerospace systems, atomic energy controls, sea floor repeaters, vehicle operating controls, medical devices for life support, etc.) are requested to consult with FUJITSU sales representatives before such use. The company will not be responsible for damages arising from such use without prior approval. Any semiconductor devices have inherently a certain rate of failure. You must protect against injury, damage or loss from such failures by incorporating safety design measures into your facility and equipment such as redundancy, fire protection, and prevention of over-current levels and other abnormal operating conditions. If any products described in this document represent goods or technologies subject to certain restrictions on export under the Foreign Exchange and Foreign Trade Control Law of Japan, the prior authorization by Japanese government should be required for export of those products from Japan.
North and South America FUJITSU MICROELECTRONICS, INC. 3545 North First Street, San Jose, CA 95134-1804, U.S.A. Tel: +1-408-922-9000 Fax: +1-408-922-9179 Customer Response Center Mon. - Fri.: 7 am - 5 pm (PST) Tel: +1-800-866-8608 Fax: +1-408-922-9179 http://www.fujitsumicro.com/ Europe FUJITSU MICROELECTRONICS EUROPE GmbH Am Siebenstein 6-10, D-63303 Dreieich-Buchschlag, Germany Tel: +49-6103-690-0 Fax: +49-6103-690-122 http://www.fujitsu-fme.com/ Asia Pacific FUJITSU MICROELECTRONICS ASIA PTE. LTD. #05-08, 151 Lorong Chuan, New Tech Park, Singapore 556741 Tel: +65-281-0770 Fax: +65-281-0220 http://www.fmap.com.sg/
F0010 (c) FUJITSU LIMITED Printed in Japan

▲Up To Search▲

Price & Availability of FAR-M3DC-97M200-E100

	To Download FAR-M3DC-97M200-E100 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .